WEICON Plastic Metal F2
WEICON 001
WEICON F2 is suited for the casting of models, moulds and templates, for the repair of porous and damaged castings, for the production of prototypes and holding devices, and for pouring out swages to test precision.
WEICON F2 can be used in tool construction, model and mould making, and in many other industrial applications.
ISSA: 75.509.11/12
IMPA: 81 29 33/34
INDUSTRIAL SEALANTS
W6436
Elastic adhesives and sealants are used in many areas of industrial production. They combine the advantages of adhesive bonding and sealing technology and are used wherever the elasticity and sealing of a joint are the most important.
Weicon adhesive and sealant are classified in three product groups with a differing chemical basis.
ADHESIVES AND SEALANTS WEICON
WE867347
ADHESIVES AND SEALANTS the fast, strong and universally usable power adhesive. Replaces traditional fixings like screws, pegs, rivets, etc. Speed-Flex® is pasty and stable and, thus, suitable for problem-free bonding even on vertical surfaces both in-house and outside.
Many materials, like metals, plastics (except PE, PP, PTFE), concrete, marble, natural and artificial stone, ceramic, enamel, gypsum, plates of MDF, wood, flake or gypsum plaster boards can be bonded permanently to themselves and among each other.
Especially on vertical surfaces where additional fixing is not possible or desired, Speed-Flex offers numerous application possibilities, e. g.:
fastening of cable conduits to walls, ceilings and floors
bonding of mopboards and corner clips
bonding of stairs
fixing of insulating material, e.g. insulating boards
MIXING SEALANTS WEICON
MS87479
The fast, strong and universally usable power adhesive. Replaces traditional fixings like screws, pegs, rivets, etc. Speed-Flex® is pasty and stable and, thus, suitable for problem-free bonding even on vertical surfaces both in-house and outside.
Many materials, like metals, plastics (except PE, PP, PTFE), concrete, marble, natural and artificial stone, ceramic, enamel, gypsum, plates of MDF, wood, flake or gypsum plaster boards can be bonded permanently to themselves and among each other.
WEICON Easy Mix S 50 Sealant
WEICON 003
Processing WEICON Easy-Mix products can be processed directly from the double cartridges with the help of the included static mixer. Reject the first 5 cm of the dosed bead. Apply adhesive to only one of the surfaces to be bonded. The pot life given is for a material quantity of 10 ml at room temperature. If larger quantities are used, the curing time will be faster. Similarly, higher ambient temperatures shorten the cure times (as a rule of thumb, every +10°C increase above room temperature will halve working and curing time). Temperatures below +16°C will extend working and curing times considerably, while below about +5°C, no reaction will take place at all. Storage When kept at a constant room temperature of about +20°C and unopened in dry conditions, WEICON Epoxy Adhesives will keep for at least 18 months. Avoid direct sunlight. If these storage instructions are disregarded, the storage life will be reduced to six months. Epoxy resins are fundamentally liable to crystallise at temperatures of less than +5°C.
Lock Pen System AN 302-70
AN 302-70
WEICONLOCK is ready for use and should be applied evenly direct from the bottle/tube with the dispensing tip (avoid direct contact of dispensing tip with metal). On press fitted parts and larger cylindrical assemblies a thin and uniform layer should be applied on both surfaces. In the case of threaded blind holes fill sufficient quantity in the bore hole. On screws and bolts, apply WEICONLOCK around the thread. Do not pour back into the bottle any WEICONLOCK fluid which had contact with metal; even smallest metal particles will cause the content of the bottle to cure. In series construction, the use of manual or automatic applicators is recommended.
Structural Adhesive RK 700
WEICON 002
WEICON Easy-Mix RK-7200 is a high strength, solvent-free and fast-curing structural adhesive. It is based on MMA (methyl methacrylate) and has an excellent adhesion on many materials. Because of the transparent curing, RK-7200 is particularly suitable for transparent joints where the bonding seam should not be visible. This adhesive can also be used for structural bondings where a coloured adhesive would not fi t optically to the construction parts. Thus, transparent plastics like e. g. acrylic glasss (PMMA) and other materials can be bonded in a clean and appealing way.
|
Send Inquiry
